Risk Racing - Lock-N-Load - Moto Transport System. No straps needed to transport your dirtbike

Risk Racing Lock-N-Load Moto Transport System holding dirtbike in trailer

MX Lock-N-Load Junior Moto Transport System - Size supports bikes 18 inch-20 inch Wide (455mm-510mm Wide) and 12.5 inch-14.75 inch tall (320-375mm tall) which fits most 85cc MX bikes (or bikes with similar geometry) / MX Lock-N-Load FULL SIZE supports bikes 18 inch-20 inch Wide (455mm-510mm Wide) and 15 inch-17.5 inch tall (380-445mm tall) which fits most full size MX bikes (or bikes with similar geometry). For accuracy, measure both footpegs at the same time. Measure your bike to ensure fit

Lock-N-Load Strapless Motocross Transport System used by Moto Concpets - Mike Alessi 800

Lock-N-Load Strapless Motocross Transport System - Used bike Joe Gibbs Racing - custom crate to ship bike to Europe - JGRMX.com with Toyota, Yamaha - JGR

Lock-N-Load Moto Transport System - two mx bikes loaded into a trailer. no messy straps

Two Honda mx bikes loaded into an RV with the Lock-N-Load Moto Transport System. No messy straps needed

Two Honda mx bikes loaded into an RV with the Lock-N-Load Moto Transport System. No messy straps needed. Rear View

Honda mx bike loaded into an RV with the Lock-N-Load Moto Transport System. No messy straps needed

Lock-N-Load Moto Transport System by Risk Racing - Exploded View

Risk Lock-N-Load Strapless Motocross Transport System - Don't trust your bike in anything less

Mount the Lock-N-Load Strapless Motocross Transport System in your truck bed with the "Truck Bed Mounting Plates"

Lock-N-Load JUNIOR Strapless Motocross Transport System by Risk Racing - holding Yamaha dirtbike

Lock-N-Load - Strapless Moto Transport System

Name: Lock-N-Load - Strapless Moto Transport System
Brand: Risk Racing
SKU: 77849
Rating: 4.8 (24 reviews)

£159.99

▼Features

Saves your fork seals
No more straps or wheel chocks
Load more bikes and gear in your truck, van or trailer
Quick release from the trailer floor
Extra trailer plates are available (Sold Separately)
TRUCK PLATES available for mounting in trucks (Sold Separately)

▼Specifications

LOCK-N-LOAD
Model# 77849
Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
Weight: 20lb (9.1kg)
1 year warranty

Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)

LOCK-N-LOAD JUNIOR
Model# 00204
Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
Weight: 19lb (8.6kg)
1 year warranty

Designed to fit most 85cc MX bikes
(or bikes with similar geometry)

How to measure your bike

To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to contact us if you have any bike specific questions. Select your desired size in the online store when ordering.

The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.

▼Included

[1] Lock-N-Load or Lock-N-Load JUNIOR
[1] Trailer Mounting Plates
[1] Mounting Hardware
[1] Instruction Sheet

Available in Two Sizes
**Measure your bike before ordering to ensure fit**

The Easiest Way to Transport your Bike

The “Lock-N-Load” Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by unscrewing the 4 thumb screws leaving only the low profile mounting plates. Each plate has a “D” ring for additional anchor points on your trailer floor.

Rotate the knobs into the lock position and simply roll or ride your bike into the trailer until your foot pegs hit the open jaws of the Lock-N-Load.

Then step on the upper jaws and they will automatically lock into place.

For additional safety, insert the attached locking pins prior to transport. You can replace the locking pins with pad locks for added security and a theft deterrent.

To release your bike, simply rotate the knobs into the release position and step on the top jaws.

This will automatically release the jaws and free your motorcycle.

Available in Two Sizes

Standard

Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)
*see specifications for size guide

Junior

Designed to fit most 85cc MX bikes
(or bikes with similar geometry)
*see specifications for size guide

Features

Saves your fork seals

No more straps or wheel chocks

Load more bikes and gear in your truck, van or trailer

Quick release from the trailer floor

Extra trailer plates are available (Sold Separately)

TRUCK PLATES available for mounting in trucks (Sold Separately)

What's Included

Lock-N-Load

Available in two sizes

1x Pair Trailer Plates

plus mounting hardware

California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Language

Currency